2016 JCB 512-56 Diesel

2016 JCB 512-56 Telehandler — 3,820 Hours, Make JCB, Model 512-56, Category Telehandler

This 2016 JCB 512-56 Telehandler brings together the capacity, reach, and reliability serious builders demand, with just 3,820 hours and the work-ready power of a diesel drivetrain. Backed by NLEQ’s thorough inspection and testing process, this used JCB telehandler gives you the confidence to put it straight to work on your toughest lifts. If you’ve been looking for a proven 12,000-pound class telehandler with long-reach capability, dependable performance, and compelling ownership value, this 512-56 deserves a close look.

JCB engineered the 512-56 for high-production jobsites where consistent lifting, staging, and material handling are critical to schedule and safety. With a robust boom designed for a 56-foot maximum lift height and strong forward reach, the machine helps crews place heavy loads precisely where they’re needed—from multi-story framing and stone or block work to roof decking and steel packages. The diesel powerplant delivers the torque and fuel efficiency contractors count on for all-day operation. And with JCB’s reputation for rugged build quality, you’re investing in a platform known across the industry for durability and uptime.

Specifications

• NLEQ Stock Number: 146920
• Year: 2016
• Manufacturer: JCB
• Model: 512-56
• Category: Telehandler
• Hours: 3,820
• Fuel Type: Diesel
• Rated Capacity: 12,000 lb (12000# Capacity)
• Maximum Lift Height: 56 ft (56' Lift Height)
• Price: $59,875

Each detail above translates into practical benefits. The diesel configuration is built for heavy-duty duty cycles, providing strong low-end torque for lifting at height and cycling boom functions under load. The 12,000-pound rating supports the movement of full bundles of lumber, pallets of block or brick, rebar packs, HVAC units, and similar heavy materials. With a 56-foot lift height, crews can service multi-level structures, set materials over obstacles, and stage loads safely out of the way. Combined with the JCB 512-56’s proven chassis and boom design, these specs enable a productive, versatile telehandler that fits a wide range of construction and industrial tasks.

Condition

This is a used 2016 JCB 512-56 with 3,820 operating hours. As with every unit offered by NLEQ, it has been carefully inspected and tested prior to listing so you can make an informed purchase. We focus on transparent, accurate information to reflect real-world condition, function, and value for the next owner. The hours on this machine indicate solid prior use while remaining well within the range many contractors target for dependable second-life service. If you need additional details on functional checks, service observations, or photos and video, our team will promptly provide them so you can assess suitability for your application.

Advantages

• Proven capacity class: A 12,000-pound rating provides the muscle to handle dense, high-value loads without multiple trips, helping reduce cycle times and keep crews moving.
• Long-reach performance: A 56-foot maximum lift height allows material placement on elevated decks, mezzanines, and rooftops, improving site logistics and safety by reducing manual handling.
• Diesel efficiency and torque: Diesel power delivers the low-RPM torque telehandlers need for smooth lift, steady boom control, and efficient operation across long shifts.
• JCB build quality: JCB’s 512-56 platform is widely recognized for robust construction, engineered to withstand tough daily jobsite conditions with minimal downtime.
• Operator-friendly control: Telehandlers in this class are designed for intuitive operation and precise load placement, which helps shorten training time and enhances productivity.
• Versatility with attachments: From forks to job-specific implements, a telehandler like the 512-56 supports multiple tasks, allowing one machine to do the work of several on site.
• Strong residual value: Demand for long-reach, high-capacity telehandlers remains consistent, supporting resale value and long-term ROI.

Applications

The JCB 512-56 is a go-to telehandler for general contractors, specialty trades, industrial maintenance teams, and material handling operations that require both strength and reach. With the ability to lift heavy payloads and place them at 56 feet, it’s well suited for multi-story construction, staging of materials at height, and handling large components in tight or congested sites. Its diesel power and telehandler versatility make it practical across diverse projects and environments.

• Commercial construction: Move and place structural materials, roofing, and mechanical equipment efficiently across elevated work areas.
• Concrete and masonry: Lift pallets of block, forms, rebar, and bulk materials to working decks with fewer lifts and less manual handling.
• Framing and carpentry: Stage lumber packs and sheathing at height to reduce ground-to-deck transport time and streamline workflow.
• Steel erection support: Position hardware, decking, and tool pallets where crews can access them quickly and safely.
• Industrial facilities: Handle heavy parts and supplies in plants, warehouses, and yards where a long-reach, all-terrain handler improves access.
• Site logistics: Keep materials organized off the ground and closer to the point of use, reducing clutter and improving site safety.

Ownership Value

Buying a used telehandler like this 2016 JCB 512-56 from NLEQ can significantly lower your cost of ownership versus new equipment while preserving the capabilities that matter most on the job. You get heavy-duty capacity, long-reach performance, and diesel efficiency at a price point that preserves capital for other priorities. With 3,820 hours, this machine sits in a practical range for contractors seeking a balance between initial cost and remaining service life. JCB’s widespread dealer network and parts availability further support long-term maintenance and uptime. Telehandlers that deliver 12,000-pound lifting and 56-foot height are in steady demand, which helps protect resale value when you decide to refresh your fleet.

The economics are straightforward: fewer lifts, faster staging, and the ability to complete more of the job with one machine translate to measurable productivity gains. When a telehandler can place heavier loads exactly where crews need them, projects move faster with fewer hands on the ground. Over time, those efficiencies—combined with a sensible acquisition cost—add up to strong ROI.

Why This 512-56

Among used telehandlers in this class, this JCB 512-56 stands out for its combination of year, hours, and capabilities. The 2016 vintage gives you modern design and ergonomic refinements, while 3,820 hours indicate a machine with meaningful work history and substantial productive life ahead. The capacity and reach put it squarely in the high-performance bracket for mid- to large-scale jobsites. Whether you’re staging roof materials to 56 feet, moving dense pallets, or supporting specialty trades across multiple levels, this unit delivers the power and stability you need.

At a listed price of $59,875, it offers compelling value in today’s market for a long-reach, high-capacity telehandler. If your crews have outgrown smaller handlers—or if renting a comparable unit has become a recurring cost—owning a 512-56 can quickly pay dividends in scheduling flexibility and reduced equipment overhead.

Why Buy from NLEQ

NLEQ is one of the top leaders in selling used heavy construction equipment. Every machine we list is carefully tested and inspected before it’s offered for sale, so buyers receive accurate, honest, and reliable information. Our process focuses on transparency: we present the real specifications, hours, configuration, and condition to help you make a confident, data-driven decision. We understand that a telehandler is a critical piece of your project plan; when you purchase from NLEQ, you’re working with a team that knows the equipment, the applications, and the realities of keeping a project on schedule.

We also make the buying experience straightforward. From answering technical questions and providing additional photos or video to discussing transport options, our goal is to ensure your equipment arrives ready to work. If you need help comparing this JCB 512-56 to other telehandlers in our inventory, our experts will walk you through the differences so you can select the best fit for your scope, budget, and timeline.

Next Steps

If the 2016 JCB 512-56 Telehandler aligns with your needs, contact NLEQ today to request more information, confirm availability, or place a hold. Reference NLEQ Stock Number 146920. Our team can provide a detailed rundown of the machine, share additional media, and discuss delivery options to your jobsite. Telehandlers with 12,000-pound capacity and 56-foot lift height move quickly—especially clean, accurately represented units like this one—so we encourage serious buyers to reach out promptly. Put this diesel JCB 512-56 to work and give your crews the reach, strength, and reliability they need to keep projects moving.