2017 Skytrak 8042 Diesel

2017 Skytrak 8042 Telehandler – 3058 Hours – Category: Telehandler

This 2017 Skytrak 8042 Telehandler with 3,058 hours is a well-kept, work-ready machine from one of the most trusted names in rough-terrain material handling. Offered by NLEQ, a recognized leader in used heavy construction equipment, this unit has been carefully tested and inspected so you can buy with confidence. It’s a straightforward, high-demand Skytrak telehandler featuring a proven Cummins diesel powerplant and a Side Tilting Carriage—an ideal combination for productive, precise material placement on busy jobsites. Reference NLEQ# 146640. Priced at $59,950.

Specifications

• Make: Skytrak
• Model: 8042
• Year: 2017
• Category: Telehandler
• Hours: 3,058
• NLEQ Stock Number: 146640
• Fuel Type: Diesel
• Power Manufacturer: Cummins
• Carriage Type: Side Tilting
• Price: $59,950

All specifications above are taken directly from the information provided for this unit. The Skytrak 8042 designation is recognized across the industry for balanced reach and capacity in the rough-terrain telehandler category. As with any pre-owned machine, buyers should review the listed specs and contact NLEQ to discuss any additional configuration details important to their operation.

Condition

NLEQ’s process centers on accurate representation and transparency. This Skytrak 8042 Telehandler has been carefully tested and inspected prior to listing, with operating functions verified so you can focus on your work rather than surprises. The 3,058-hour reading reflects a machine that has seen meaningful but measured use for its age, typical of a dependable jobsite telehandler that was put to work and maintained. As always, you are welcome to request additional photos, videos, or to schedule an in-person or third-party inspection to confirm condition to your standards.

Key Advantages and What They Mean in Daily Use

• Cummins-powered confidence: The Cummins diesel engine is known for robust torque, long service life, and widespread parts support. In practice, that means confident lifting and travel on rough terrain, predictable cold starts with proper maintenance, and access to service expertise virtually anywhere. For owners and fleet managers, Cummins power often translates to lower downtime and strong long-term value.
• Diesel efficiency for heavy work: Diesel power remains the standard for telehandlers because of its efficiency at low RPM and the torque needed to handle palletized loads, truss packs, pipe, and jobsite materials. The diesel setup in this Skytrak 8042 is tailored for real-world productivity, giving operators the grunt to position loads smoothly and safely.
• Side Tilting Carriage for precise placement: The Side Tilting Carriage allows the operator to fine-tune fork angle to the left or right without repositioning the entire telehandler. On uneven ground or when aligning to elevated bays and platforms, that side tilt reduces time spent jockeying the machine and helps protect materials. Fewer repositioning moves can also mean less ground disturbance and better cycle times.
• Telehandler versatility: A Skytrak 8042 is built for rough terrain access and multi-story placement. Operators appreciate the high seating position and straightforward controls that let them load trucks, place materials at height, and navigate tight sites. The result is one machine that can cover a wide range of lifting and staging tasks across construction, industrial, and site development environments.
• Attachment readiness and job flexibility: Many owners use telehandlers with a variety of attachments such as forks, truss booms, and work platforms. If your operation requires powered attachments, ask about auxiliary hydraulics on this Skytrak 8042—aux hydraulics enable hydraulic-driven tools and specialty attachments that can extend the machine’s utility. Confirm current configuration with NLEQ to match your needs.
• Rough-terrain capability considerations: Skytrak telehandlers are commonly operated in demanding, unimproved conditions where 4WD is valued for traction and control. Solid tires are also a popular choice for puncture-prone sites to reduce downtime from flats. If 4WD or solid tires are critical for your job, discuss the specific configuration on this unit with our team so we can verify exactly what’s equipped and ensure it aligns with your site conditions.

Because telehandlers often run on variable terrain, features like a Side Tilting Carriage can materially improve safety and productivity by letting operators keep loads level while the machine itself is on a slope or when racking materials tightly. When paired with dependable diesel power and a proven drivetrain, the Skytrak 8042 platform is designed to work full shifts with predictable results.

Applications

• General construction and framing: Move lumber, trusses, engineered materials, and sheathing where they need to go. Side tilt helps align palletized loads precisely without extra maneuvering.
• Masonry and concrete trades: Stage block, formwork, and mixes at elevation with confidence. The telehandler format speeds up material flow and reduces manual handling.
• Roofing and exterior envelope: Lift shingles, membrane rolls, fasteners, and panels to roof level efficiently; side tilt aids accurate placement along parapets and edges.
• Industrial and plant maintenance: Support shutdowns and maintenance windows by placing equipment, conduit, and fabrication materials indoors or outdoors across variable surfaces.
• Utilities and site work: Position pipe, shoring, and trench boxes; move aggregates and jobsite supplies through rough access points where conventional forklifts struggle.
• Rental fleet use: The Skytrak 8042 is a staple in rental inventories thanks to straightforward operation and proven reliability; Cummins diesel power and a simple control layout help shorten operator learning curves.

Where a crane is too much and a conventional forklift can’t reach, a telehandler bridges the gap. The Skytrak 8042’s reputation in construction circles stems from its ability to do daily lifting and staging tasks quickly and safely, contributing tangible productivity gains across a wide range of projects.

Ownership Value

• Proven brand reputation: Skytrak telehandlers have built a large base of satisfied owners across North America. That broad adoption supports parts availability, service knowledge, and resale strength.
• Engineered for uptime: Cummins diesel power paired with a straightforward, rugged design helps minimize downtime. Routine service items are typically accessible, making daily checks and scheduled maintenance more efficient.
• Operator-friendly: Clear sightlines and intuitive controls aid operator performance and help reduce cycle times. When a machine is easy to run, it’s easier to keep productive, shift after shift.
• Resale and fleet flexibility: Demand for the Skytrak 8042 model remains strong. Owners appreciate the versatility: it slots into general contracting, industrial work, and specialty trades without being overbuilt for smaller sites.

For buyers comparing options, it’s also helpful to understand how model naming is used in the market. The “8042” designation is widely associated with the 8,000-lb class and approximately 42-ft reach in this model series. While that naming convention provides helpful context, always rely on the documented specifications for a particular machine and confirm any configuration details with NLEQ that are important to your scope of work.

Why This 8042 Stands Out

If you’re looking for a used telehandler for sale that balances capability, reliability, and cost, this 2017 Skytrak 8042 checks the right boxes. The combination of a Cummins diesel engine and a Side Tilting Carriage translates into real-world advantages on uneven terrain and during precise load placement. With 3,058 hours, it represents a solid, work-ready option backed by NLEQ’s inspection process. The $59,950 price point offers compelling value when you consider the brand reputation, engine pedigree, and jobsite versatility you’re getting in one package.

Why Buy from NLEQ

NLEQ is one of the top leaders in selling used heavy construction equipment, with a reputation built on honest listings and rigorous equipment checks. Every machine we offer is carefully tested and inspected before being listed for sale. That commitment to accuracy and transparency helps you budget, plan, and operate with confidence. We focus on delivering reliable machines and straightforward, fact-based information—so you can make a smart purchase decision without guesswork.

Next Steps

Have questions or want to see more? Reference NLEQ# 146640 and contact our team for additional photos, videos, or to schedule an inspection. Discuss any configuration details that matter to your job—such as auxiliary hydraulics, tires, or drivetrain—so we can confirm exactly what this Skytrak 8042 includes today. Used equipment availability can change quickly; secure this 2017 Skytrak 8042 Telehandler with 3,058 hours at $59,950 and put a proven, Cummins-powered, side-tilt-equipped machine to work on your next project.